2022 Land Pride FDR36 Series FDR3690
- Year 2022
- Make Land Pride
- Model FDR36 Series
2022 Land Pride FDR36 Series FDR3690
Our FDR3690 Grooming Mower is built for commercial use by mowing contractors. Contractors will appreciate the ease of maintenance and the 6 free-swinging medium-lift blades that provide a uniform cut in heavy turf grasses. The tapered deck design allows operators to get close to obstacles while the rear discharge directs debris toward the ground, allowing for even distribution of clippings.
Features may include:
QUICK-HITCH COMPATIBLE- Our Quick-Hitch System allows you to quickly connect and disconnect from the implement - most without leaving the tractor seat. This is a real time saver when working on multiple projects.
- Top and bottom hitch points float up and down which allows the mower to float over uneven terrain.
- 5 Year Limited Gearbox Warranty demonstrates our confidence in the gearbox's quality and lasting performance.
- Keeps the driveline off the ground when not in use.
- Clevis type lower hitch points allow for easy hook-up. Simply remove pins and back into clevises.
- The wide, even dispersal of grass leaves a fine thin layer directly behind the mower, vs. a possible windrow to the side. Keeps grass from blowing in unwanted areas. Easier to mow around objects.
- Frame takes stress out of deck by supporting it.
- Rear wheels don't track behind the front wheels to reduce laying grass over.
- Main drive cast iron pulley offers superior strength and belt slippage control.
Engine
Engine Power
Tractor Rating: 30-70 hp (22.4 - 52.2 kW)
Drivetrain
Driveline
Heavy-Duty Cat. 4 W/Quick Coupler
Gearbox
540 rpm Cast Iron Housing Gearbox With Beveled Gears
Compression Ratio
1:2.75
Wheels & Tires
Wheels
Castered Gauge Wheels: 5" x 13" Semi-Solid Tire with Bearings
Operational
Operating Speed
Blade Tip: 16,500 fpm (83.8 mps)
Chassis
Hitch/Type
Category l | Quick Hitch Compatible: Fits Land Pride Quick Hitch | Lower Hitch: Floating Clevis with Plated Pins | Top Link: Floating Clevis
Deck Thickness
Material: 3/16 inch (5 mm)
Dimensions
Dimensions
Blade Overlap: 2 inch (5.1 cm) | Blade Spindles: 1 3/8" Stress-Proof Shaft
Cutting Width
90 inch (2.29 m)
Overall Width
92 inch (2.34 m)
Overall Height
38 1/8 inch (.97 m)
Overall Length
85 7/8 inch (2.18 m)
Height
Cutting: 1 inch (25 mm) to 6 1/2 inch (165 mm) in 1/4 inch (6 mm) increments with plated spacers
Spindle Diameter
Caster Wheel Spindle: 1 1/4" Diameter with Greasable Bushing
Blade Composition
Free swinging, 1/4" x 2 1/2" x 14" Hardened, Medium Lift (2 per blade spindle)
Capacities
Oil capacity
Gearbox: 3.5 pints (1.66 L)
Weights
Weight
Without Front Roller: 930 lbs (421.8 kg)
Features
Features
Belt Take-Up: Spring Loaded Idler
Lubrication
Gearbox: 80-90W EP Gear Lube
Discharge Type
Rear
Spindle Type
Deck Housings: Cast Iron Greasable Hubs
Belt Type
Double V Powerband Belt