2022 Land Pride AFM4214 Series 2
- Year 2022
- Make Land Pride
- Model AFM4214 Series
2022 Land Pride AFM4214 Series 2
The Land Pride AFM4214 All Flex Grooming Mower provides users with an excellent cut quality on groomed areas such as sports fields, theme parks, fairways, turf farms, and large estates. They can be ordered with slip-clutch or conventional wing driveline configurations. The mower offers independent deck flotation and zero turning radius thanks to the sleek frame design. The contour-following capability, highly productive cutting widths, and rear discharge design of the floating cutting decks will greatly reduce wide-area cutting times and still deliver beautifully groomed surfaces at mowing speeds up to 6 mph.
Features may include:
GEARBOX WARRANTY- 5 Year Limited Gearbox Warranty demonstrates our confidence in the gearbox's quality and lasting performance.
- Over center release easily takes tension off the drive belts during extended off time, or for belt replacement.
- Anti-scalp rollers on nose and trailing edges of decks protect the deck as well as the turf.
- 23" Large transport tires offer smooth roading and less grass compaction.
- Sleek frame design allows operator to make tighter turns without leaving windrows and skips. The AFM virtually becomes a zero turn mower.
- Low deck pivot allows for greater side to side flotation on the wing decks.
Engine
Engine Power
40-70 HP
Drivetrain
Drivetrain
B-Section V Belt
Driveline
Input: Cat. 4 CV w/Slip Clutch | Deck: Cat. 3
Gearbox
3 Wing, 1 Splitter
Wheels & Tires
Tires, Rear Specification
Deck 10 total: 15 x 6.6 Air Tire, Sealant or 18 x 9.5 Air Tire, Sealant | Transport and Bearing: 23 x 10.5, Sealant Tapered Bearings
Wheels
Deck Spindles: 1-1/4"
Operational
Operating Conditions
Mowing capacity @2mph: 3.39 Acres/hr
Operating Speed
Gearbox: 540 RPM | Blade Tip: 18,396 fpm | Blade Spindle: 3,362 RPM | DriveTrain: 540 RPM
Chassis
Hitch/Type
Pull-Type, Adjustable Clevis & Safety Tow Chain
Deck Thickness
3/16"
Dimensions
Dimensions
Wing Cylinders: 2-1/2" x 12" | Rear Deck Cylinder: 2-1/2" x 8" | Decks: 3 each 60" | Deck Overlap: 6" | Blade Size: 5/16" x 2-1/2" x 20-29/32" | Blade Overlap: 1-1/4" | Blade Spindles: 1-3/8" Stressproof® Shaft | Flex - Wings: 23° L-R, 22° F-B | Flex - Center: 10° L-R, 22° F-B
Width, Working Position
14' (427 cm)
Overall Width
14' 3"
Transport Width
7' 11'
Height
Cutting: 3/4" - 5-1/4" in 1/4" Incr
Weights
Weight
Positive Tongue: 540 lb | 3,000 lb (1,361 kg)
Features
Features
Blade Bearings: Greaseable Ball Bearings | Anti-Scalp Roller: Front Center and Outside Deck Corners
Construction Material, Deck
Spindle Housing Cast Iron Greaseable Hubs | Deck Spindles: w/Nylon Bushings
Discharge Type
Rear